Step by step guide.
-Lift up the lid of the light machine. Make sure the glass is clean.
-Close the lid back down, fasten down with locks each side, and turn the light on.
-The light takes some time to brighten and you will see it appear underneath the machine.
-When the machine is ready for use, place your film positive onto the glass.
-Next place your mesh on top of the positive.
-Close the lid back down and fasten the locks either side.
-Turn the vacum switch on. This will suck all excess air out meaning your mesh doesnt move around.
-Once the vacum has finished, press the small green button.
-Afterwards hold down the start button for 5 seconds.
-The light timer will appear, and the process has started.
-You just have to wait for it to finish.
WARNING- DO NOT LIFT THE LID UP WHILST ITS IN USE, AS THE LIGHT WILL BLIND YOU.